Air Nozzles

SILVENT X03 is a stainless steel blowing nozzle with patented multi-Laval technology. The energy saving blowing nozzle is part of Silvent’s revolutionary new X-series. The nozzle in the new X series has a completely new and innovative design that creates a concentrated jet of air with reduced turbulence, thus enabling a more targeted, effective blowing force. Thanks to the newly patented technology, the air nozzle’s design optimizes the air pressure’s change from potential energy to aimed concentrated kinetic energy. This allows for maximal use of the air pressure. SILVENT X03 has about three times more blowing force than SILVENT X01. The unique design makes it possible to reduce noise levels during blowing by more than 10dB(A). The blowing nozzle is perfect for environments with high cleanliness requirements, such as the food industry. The nozzle has a 1/4” connection.

• Stainless steel multi-Laval nozzle

• Noise reduction: 16 dB(A)

• Energy savings: 23.0 scfm

SILVENT 209 L is part of a new generation of patented Laval nozzles. It is a refinement of Silvent’s 208 and 209 nozzle series and represents an entirely new phase in blowing technology. The effect is achieved by surrounding a core jet moving at supersonic speed with a protective sheath of air running parallel to the direction of the central stream. There is a mix of divergent slots and holes around the Laval orifice that generates a quiet, powerful and laminar air flow. This nozzle provides extremely efficient blowing that utilizes your compressed air optimally.

• Laval nozzle (zinc)

• Noise reduction: 17 dB(A)

• Energy savings: 7.7 scfm

SILVENT 209 L-S: made of stainless steel with 1/4” male thread. Withstands high ambient temperatures and suitable for applications involving mechanical wear. SILVENT 209 L-S is part of a new generation of patented Laval nozzles. It is a refinement of Silvent’s 208 and 209 nozzle series and represents an entirely new phase in blowing technology. The effect is achieved by surrounding a core jet moving at supersonic speed with a protective sheath of air running parallel to the direction of the central stream. There is a mix of divergent slots and holes around the Laval orifice that generates a quiet, powerful and laminar air flow. This nozzle provides extremely efficient blowing that utilizes your compressed air optimally.

• Stainless steel Laval nozzle

• Noise reduction: 17 dB(A)

• Energy savings: 7.7 scfm

SILVENT 705: specially made entirely of stainless steel with aerodynamic slots to allow optimal utilization of compressed air while keeping the noise level to a minimum. Blowing force approximately 5 times stronger than SILVENT 701 (15 N (3.3 lbs)). Used in industries that require high blowing forces, e.g. steel mills. Withstands high ambient temperatures. Part of SILVENT's 700 series together with 701, 703, 710 and 720.

• Stainless steel slot nozzle

• Noise reduction: 20 dB(A)

• Energy savings: 53.0 scfm

SILVENT 707 L: a stainless steel Laval nozzle. Compressed air is utilized optimally in this nozzle and its introduction constitutes a new dimension in blowing technology. The effect is achieved by surrounding a core of air traveling at supersonic speed with a protective sheath of air moving parallel to the central air jet. The central stream of air in the SILVENT 707 L is generated by a Laval nozzle. The design of the nozzle converts all of the energy stored in the compressed air into kinetic energy without permitting the air jet to expand laterally after leaving the nozzle. The protective sheath of air prevents the core stream from being slowed down by the surrounding air and allows it to be utilized at full effect. This hinders the creation of turbulence and thereby lowers the noise level.

• Stainless steel Laval nozzle

• Noise reduction:22 dB(A)

• Energy savings: 85.9 scfm

SILVENT 961: a small, angled flat nozzle that generates a broad but thin blowing pattern. Small mounting dimensions make it especially suitable for machine designs where space limitations are a problem. In many cases mounting is facilitated by the fact that the blowing angle is perpendicular to the plane of the threads. Can also be mounted in a manifold array, creating compact, quiet and efficient air knives. The outlet orifices are protected against external forces by fins.

• Mini-flat nozzle (zinc)

• Noise reduction13 dB(A)

• Energy savings5.9 scfm

SILVENT 931 is a small angled flat nozzle in stainless steel. The nozzle generates a wide thin air stream. Due to its small dimensions, the nozzle is very suitable for machine designs with limited space. The fact that the nozzle is blowing in 90° angle often makes installation easier. The SILVENT 931 is also commonly used in small, silent and efficient custom made air knifes. The Silvent technology makes it possible to combine efficient and silent blowing.

• Stainless steel mini-flat nozzle

• Noise reduction17 dB(A)

• Energy savings7.1 scfm

SILVENT 921: flat nozzle that generates a broad and efficient blowing pattern. Outstanding for use wherever a wide but thin striking surface is required. Flat nozzles are suitable for most areas of application, such as: drying, transporting, cooling, cleaning, etc. Often used in manifold systems, providing silent and highly efficient air knives. Made of zinc with 1/8" male connection thread. The exhaust ports are protected from external forces by fins.

• Flat nozzle (zinc)

• Noise reduction: 15 dB(A)

• Energy savings: 7.7 scfm

SILVENT 971: flat nozzle of stainless steel. Meets virtually every demand industry places upon a modern air nozzle. The design of the nozzle creates an air stream with a broader striking surface - clearly an advantage when wide objects must be dried, sorted or cleaned. Capable of withstanding high ambient temperatures and corrosive chemical environments, as well as satisfying the hygienic requirements of the food processing industry.

• Stainless steel flat nozzle

• Noise reduction: 14 dB(A)

• Energy savings: 5.3 scfm

SILVENT 973: extra-broad flat nozzle of stainless steel. Meets virtually every demand industry places upon a modern air nozzle. The design of the nozzle creates an air stream with a broader striking surface - clearly an advantage when wide objects must be dried, sorted or cleaned. Capable of withstanding high ambient temperatures and corrosive chemical environments, as well as satisfying the hygienic requirements of the food processing industry.

• Stainless steel flat nozzle

• Noise reduction: 19 dB(A)

• Energy savings: 20.0 scfm

SILVENT 1011: stainless steel Laval nozzle with 1/8" male thread. The Laval hole in the center creates a concentrated, supersonic jet of air. Surrounding the hole there are a number of diverging slots that generate a powerful, quiet and laminar air stream. This combination utilizes compressed air optimally. Halves the noise level and reduces air consumption dramatically, while maintaining the force of "open pipe blowing". The nozzle and the surrounding fins prevent dead end static pressure from exceeding 210 kPa (30 psi).

• Stainless steel Laval nozzle

• Noise reduction: 15 dB(A)

• Energy savings: 12.4 scfm

SILVENT 2005: an aluminum nozzle with aerodynamic slots. Produces a strong, quiet and effective air stream. The blowing force is approximately 5 times that of SILVENT's 209 and 511 nozzles. Despite its powerful force, both the noise level and energy consumption are low in comparison with 10 mm (3/8") open pipe blowing.

• Slot nozzle (aluminum)

• Noise reduction: 18 dB(A)

• Energy savings: 51.2 scfm

SILVENT 9002W: an energy-efficient flat nozzle that generates a strong, efficient blowing force at an exceptionally low noise level. Compressed air is optimally used in this flat nozzle, which through its unique design introduces a completely new blowing technology feature. The aerodynamic nozzle design achieves the effect by maximizing entrainment of air. Each orifice is also uniquely designed to optimize the entrainment area. The air nozzle – SILVENT 9002W – is made exclusively of Zytel, a high-performance material without which the unique and truly complex Laval orifices would not be possible. These small orifices combined with the aerodynamic slots of the nozzle provide high efficiency.

• Scratch-free, flat nozzle (ZYTEL)

• Noise reduction: 22 dB(A)

• Energy savings: 21.8 scfm

SILVENT 9005W: an energy-efficient flat nozzle that generates a strong, efficient blowing force at an exceptionally low noise level. Compressed air is optimally used in this flat nozzle, which through its unique design introduces a completely new blowing technology feature. The aerodynamic nozzle design achieves the effect by maximizing entrainment of air. Each orifice is also uniquely designed to optimize the entrainment area. The air nozzle – SILVENT 9005W – is made exclusively of Zytel, a high-performance material without which the unique and truly complex Laval orifices would not be possible. These small orifices combined with the aerodynamic slots of the nozzle provide high efficiency. The nozzle is ideal for blowing applications that require extra blowing force and an extra wide air cone.

• Scratch-free, flat nozzle (ZYTEL)

• Noise reduction: 25 dB(A)

• Energy savings: 64.2 scfm

SILVENT 9015W: an energy-efficient flat nozzle that generates a strong, efficient blowing force at an exceptionally low noise level. Compressed air is optimally used in this flat nozzle, which through its unique design introduces a completely new blowing technology feature. The aerodynamic nozzle design achieves the effect by maximizing entrainment of air. Each orifice is also uniquely designed to optimize the entrainment area. The air nozzle – SILVENT 9015W – is made exclusively of Zytel, a high-performance material without which the unique and truly complex Laval orifices would not be possible. These small orifices combined with the aerodynamic slots of the nozzle provide high efficiency.

• Scratch-free, flat nozzle (ZYTEL)

• Noise reduction: 29 dB(A)

• Energy savings: 181.3 scfm

SILVENT 920 A: flat nozzle that generates a broad and efficient blowing pattern. Outstanding for use wherever a wide but thin striking surface is required. Flat nozzles are suitable for most areas of application, such as: drying, transporting, cooling, cleaning, etc. Often used in manifold systems, providing silent and highly efficient air knives. Made of zinc with 1/4" male connection thread. The exhaust ports are protected from external forces by fins.

• Flat nozzle (zinc)

• Noise reduction: 21 dB(A)

• Energy savings: 21.8 scfm

SILVENT 811: "PEEK" nozzle with a central orifice. Withstands aggressive chemical environments, corrosive cutting fluids and temperatures of up to 260°C (500°F). Protects sensitive products against scratching and impact. 1/8" male connection thread. Additional technical specifications are provided in the table.

• Scratch-free, chemical resistant PEEK nozzle

• Noise reduction15 dB(A)

• Energy savings8.8 scfm

SILVENT X05 is a stainless steel blowing nozzle with patented multi-Laval technology, developed for applications requiring a strong blowing force. The energy saving blowing nozzle is part of Silvent’s revolutionary new X-series. The SILVENT X05 has a completely new and innovative design that creates a concentrated jet of air with reduced turbulence, thus enabling a more targeted, effective blowing force. Thanks to the newly patented technology, the air nozzle's design optimizes the air pressure’s change from potential energy to aimed concentrated kinetic energy. This allows for maximal use of the air pressure. SILVENT X05 has approximately five times the blowing force of SILVENT X01. The unique design makes it possible to reduce noise levels during blowing by more than 10dB(A). The blowing nozzle is perfect for environments that demand strong blowing forces.

• Stainless steel multi-Laval nozzle

• Noise reduction: 20 dB(A)

• Energy savings: 58.9 scfm