Air Blow Guns

SILVENT 007-MJ4: with a micro nozzle for high precision and low energy consumption. By combining the 007 grip's valve construction and a stainless steel micro nozzle, you can blow exactly the amount of air required. A central hole in combination with surrounding slots makes the nozzle extremely efficient and quiet. Compared with conventional air blow guns without a nozzle, a SILVENT micro nozzle permits you to reduce compressed air consumption by up to 75% and, at the same time, keep the noise level under 76 dB(A). The blowing force is approx. 25% of that of a standard gun.

• Stainless steel micro nozzle

• Noise reduction: 8 dB(A)

• Energy savings: 2.4 scfm

SILVENT 007-MJ5: an alternative to 007-MJ4 if you need a little more blowing force. The blowing force is 1.8 N (6.4 oz) or approx. 50% of that of a standard air blow gun.

• Stainless steel micro nozzle

• Noise reduction: 8 dB(A)

• Energy savings: 1.2 scfm

SILVENT 007-MJ6: an alternative to 007-MJ4 if you need a little more blowing force. The blowing force is 2.5 N (8.8 oz) or approx. 75% of that of a standard air blow gun.

• Stainless steel micro nozzle

• Noise reduction: 8 dB(A)

• Energy savings: 1.8 scfm

SILVENT 007-P: with a PEEK nozzle that prevents unnecessary scratching. The PEEK nozzle has been specially developed for sensitive applications where expensive tools and machines absolutely may not be damaged. The nozzle is fitted on a flexible PA 12 pipe that provides additional protection against scratches caused by mechanical impact. PEEK is a unique plastic material with properties that meet the rigorous quality and safety requirements of, for example, the aerospace industry. It is extremely impact resistant and is capable of handling aggressive chemical environments, strong cutting fluids and temperatures of up to 260°C (500°F). The nozzle is designed with a central hole that generates a concentrated air stream. At the same time, the sound level is low and air consumption is reduced. The PEEK guns are available with three different extension pipe lengths.

• Scratch-free, chemical resistant PEEK nozzle

• Noise reduction: 11 dB(A)

• Energy savings: 1.8 scfm

SILVENT 007-S: with a stainless steel nozzle that generates an energy efficient and silent blowing force. Suitable for really tough conditions. The solid stainless steel nozzle tip is designed to withstand intensive mechanical wear. 007-S is suitable in all industries. Blowing force 2.8 N (9.9 oz).

• Stainless steel slot nozzle

• Noise reduction: 14 dB(A)

• Energy savings: 8.2 scfm

SILVENT 007-L with a Laval nozzle is the most commonly chosen alternative. A stainless steel Laval nozzle mounted onto the 007 grip handles nearly any blowing application. A Laval orifice in the center of the nozzle creates a highly concentrated air stream that moves at supersonic speed. Around the Laval hole there are a number of diverging slots that generate a powerful, quiet and laminar airflow. The combination provides superior cleaning performance and optimal utilization of the compressed air. Fins prevent direct contact between skin and the outlet holes.

• Stainless steel Laval nozzle

• Noise reduction: 13 dB(A)

• Energy savings: 4.7 scfm

SILVENT 007-Z: with a zinc slot nozzle that efficiently utilizes the surrounding air. Provides powerful, quiet and efficient cleaning. For general-purpose blowing in environments where the nozzle is exposed to minimal mechanical wear. Blowing force 3.0 N (10.6 oz).

• Slot nozzle (zinc)

• Noise reduction: 16 dB(A)

• Energy savings: 7.7 scfm

SILVENT 500-L: with a stainless steel Laval nozzle. A Laval hole in the center of the nozzle creates a highly concentrated air stream that moves at supersonic speed. Around the Laval hole there are also a number of diverging slots that generate a powerful, quiet and laminar air flow. The combination provides superior cleaning performance and optimal utilization of the compressed air. Fins prevent direct contact between skin and the outlet holes. Blowing force 4.2 N (14.8 oz).

• Stainless steel Laval nozzle

• Noise reduction: 16 dB(A)

• Energy savings: 12.9 scfm

SILVENT 500-P: with a PEEK nozzle that prevents unnecessary scratching. The PEEK nozzle has been specially developed for sensitive applications where expensive tools and machines absolutely may not be damaged. The nozzle is fitted on a flexible PA 12 pipe that provides additional protection against scratches caused by mechanical impact. PEEK is a unique plastic material with properties that meet the rigorous quality and safety requirements of, for example, the aerospace industry. It is extremely impact resistant and is capable of handling aggressive chemical environments, strong cutting fluids and temperatures of up to 260°C (500°F). The nozzle is designed with a central hole that generates a concentrated air stream. At the same time, the sound level is low and air consumption is reduced. The PEEK guns are available with three different extension pipe lengths.

• Scratch-free, chemical resistant PEEK nozzle

• Noise reduction: 15 dB(A)

• Energy savings: 8.8 scfm

SILVENT 500-S is fitted with a stainless steel nozzle. Stainless steel nozzles are most suitable for really tough conditions. The nozzle’s solid stainless steel tip is built to withstand intensive mechanical wear. This air blow gun was developed with the user in mind, and it is the result of many years of research.

• Stainless steel slot nozzle

• Noise reduction: 14 dB(A)

• Energy savings: 6.5 scfm

SILVENT 500-Z: fitted with a zinc slot nozzle and suitable for general-purpose cleaning in environments where the nozzle is subject to little or no mechanical wear. Provides strong and extremely quiet blow-off power. The sound level is just 79 dB(A). For more aggressive environments, we recommend our 500-L or 500-S safety guns with nozzles of stainless steel.

• Slot nozzle (zinc)

• Noise reduction: 16 dB(A)

• Energy savings: 6.5 scfm

SILVENT 500-MJ5: an alternative if you want less blowing force than that of 500-S. The blowing force is 1.8 N (6.4 oz).

• Stainless steel micro nozzle

• Noise reduction: 8 dB(A)

• Energy savings: 1.2 scfm

SILVENT 501-L: fitted with a new generation of zinc Laval nozzle. A mix of divergent slots and holes surround the central Laval orifice, providing quiet, powerful and laminar air flow. This air blow gun is especially suitable for sweeping large areas or general-purpose cleaning of parts and machines. The fin design of the nozzle prevents direct contact with skin.

• Laval nozzle (zinc)

• Noise reduction: 17 dB(A)

• Energy savings: 7.7 scfm

SILVENT 5920: with a flat nozzle for applications where you want the air stream to strike a wider surface for quick and efficient blow-off. This low-noise nozzle is made of zinc and its outlet ports are protected against external forces by fins.

• Flat nozzle (zinc)

• Noise reduction: 21 dB(A)

• Energy savings: 21.8 scfm

SILVENT 500-MJ6: an alternative if you need a little less blowing force than that of 500-S. The blowing force is 2.5 N (8.8 oz).

• Stainless steel micro nozzle

• Noise reduction: 8 dB(A)

• Energy savings: 1.8 scfm

SILVENT 59002W: an air blow gun fitted with an energy-efficient flat nozzle that generates a strong, efficient blowing force at an exceptionally low noise level. Compressed air is optimally used in this air blow gun, which through its unique design introduces a completely new blowing technology feature. The aerodynamic nozzle design achieves the effect by maximizing entrainment of air. Each orifice is also uniquely designed to optimize the entrainment area. The air nozzle is made exclusively of Zytel, a high-performance material without which the unique and truly complex Laval orifices would not be possible. These small orifices combined with the aerodynamic slots of the nozzle provide high efficiency. This air blow gun is ideal for quickly and efficiently blowing surfaces clean without risk of scratches.

• Scratch-free, flat nozzle (ZYTEL)

• Noise reduction: 22 dB(A)

• Energy savings: 21.8 scfm

SILVENT 59002W-Z: an air blow gun fitted with an energy-efficient flat nozzle that generates a strong, efficient blowing force at an exceptionally low noise level. Compressed air is optimally used in this air blow gun, which through its unique design introduces a completely new blowing technology feature. The aerodynamic nozzle design achieves the effect by maximizing entrainment of air. Each orifice is also uniquely designed to optimize the entrainment area. This air blow gun is ideal for quickly and efficiently blowing surfaces clean.

• Flat nozzle (Zinc)

• Noise reduction: 24 dB(A)

• Energy savings: 23.0 scfm

Pro One is a durable hand tool designed for professional industrial use. The air blow gun is fitted with a specially designed, patented nozzle in stainless steel. This allows an effective blowing force and a low noise level. The nozzle creates a concentrated jet of air which reduces turbulence, thus enabling a more targeted, effective blowing force. The model has a lightweight, slim design. The ergonomic handle allows several different grips to make work easier and reduce the risk of repetitive strain injuries.

• Stainless steel multi-Laval nozzle

• Noise reduction: 17 dB(A)

• Energy savings: 9.4 scfm